PI Physik Instrumente Products

  1. Miniature High-Speed Piezo Scanning & Positioning Stage with Aperture: P-630

    This nanopositioning system features a clear aperture with a 30 mm diameter, travel ranges to 80 µm, and a very stiff mechanical design for fast response and high scanning frequencies. It’s been designed to provide precise optical element positioning for micromachining, microstructuring, and scanning applications.

  2. Compact 2-Axis Piezo Scan and Positioning Stage, XY Nanopositioning System: P-763

    This 2-axis Piezo scan and positioning system has a 200 µm travel range, a 30 mm x 30 mm clear aperture, a 70 mm edge length, and high positional stability and resolution with capacitive sensors.

  3. Precision XY Linear Translation Stage for Metrology

    PI’s miCos is an XY precision linear translation with a travel range of 102 mm x 102mm (4”). It features uni-directional repeatability down to 0.1µm, a 200mm/sec maximum speed, a load capacity to 20 kg, and integrated optical limit switches.

  4. Precision Motion Controller for Linear Positioners and Rotation Stages: C-884

    PI’s C-884 is a motion controller equipped with a dual-core architecture that allows for fast servo handling and command interpretation. It has been designed to work with closed-loop precision positioning systems.

  5. XY Piezo Scanner for Pixel Sub-Stepping / Image Stabilization & Dithering: P-713

    This piezo scanner features a small footprint and a low profile (45 x 45 x 6 mm with clear aperture), travel ranges to 20 x 20 µm, parallel kinematics for better multi-axis accuracy and dynamics, and more.

  6. High-End 6-Axis Piezo-Nanopositioning System

    The P-562.6CD PIMars is a 6-axis high-precision nanopositioning system. It provides fast and highly accurate multi-axis scanning and nanopositioning in applications involving biotechnology, mask/wafer positioning, micromanipulation, scanning microscopy, metrology, and interferometry.

  7. Automatic Fiber Alignment/Collimator Alignment System with 6 Computer Controlled Axes

    The H-206 is a 6-Axis Precision Alignment System for use in fiber alignment applications. It’s flexure based for high precision and includes integrated scan algorithms for fiber optic alignment. The system itself features 33 nm actuator resolution, bidirectional repeatability of 0.3µm/6µrad, 10µm.s to 10 mm/s velocity, parallel kinematics with six degrees of freedom, extensive software support, and a sophisticated controller that uses vector algorithms and a virtual pivot point.

  8. Affordable, Compact XYZ-Nanopositioning System

    The P-611.3 NanoCube® is a multi-axis Piezo system used for the alignment of fiber and nanopositioning applications. More specifically, it can be used in semiconductor testing, micromanipulation, photonics/integrated optics, and biotechnology.

  9. Piezo Nano-Focus Positioner for Heavy, High NA Objectives

    The P-726 PIFOC® is a high-load/heavy objective scanner for applications involving wafer inspection, 3D imaging, screening, confocal microscopy, surface analysis, autofocus systems, and super resolution microscopy.

  10. Vacuum Positioning Stages

    Vacuum & cryogenic applications are becoming more essential due to technologies that can only be applied in vacuum and cryogenic environments. For two decades, PI miCos has provided motion control solutions for the vacuum and cryogenic field. We supply components and systems for vacuum levels from 10-3 mbar to 10-9 mbar. Most of our standard positioning products are designed for easy conversion to meet high vacuum and UHV requirements. We also apply our vacuum expertise to complete turnkey system solutions.