PI Physik Instrumente Products

  1. Precision Motorized Planar XY Positioning Stages 6/6/2017

    PI provides a number of integrated manual and motorized XY stages and true planar XY stages based on air bearings or flexures. These integrated linear motion systems are available in different load and precision classes providing position resolution from a few microns down to nanometers and below.

  2. Ultra-Stable XY Motorized Microscope Stage With Controller And Joystick: U-780 5/25/2017

    The U-780 is a low-profile precision positioning stage with a controller and joystick for high-resolution microscopy applications. This motorized stage provides extremely high stability, which is vital for high-resolution imaging.

  3. Piezo-Z Microscopy Scanner: P-736 PInano®-Z 5/25/2017

    The P-736 PInano®-Z is a low profile, low cost, high-speed piezo-Z slide scanner with extremely fast step and settling times from 5 msec at target position. With an exceptionally low profile for easy integration and travel ranges of 100 or 200 µm, this scanner is ideally used for scanning microscopy, 3D imaging, laser technology, interferometry, metrology, biotechnology, and micromanipulation.

  4. High Precision XYZ Piezo Stage For Super-Resolution Microscopy: P-545 PInano® II 5/25/2017

    PI offers the new P-545 2nd generation PInano® high-resolution XY/XYZ multi-axis positioning system with higher linearity, simple operation, and easier access to advanced features in comparison to conventional analog piezo controllers. This PInano® II device features an easy-to-integrate low profile (20 mm), a long travel distance of 200 µm, and millisecond step time, making it ideal for super-resolution microscopy and imaging applications.

  5. PIMag® Motion Controller: C-891 1/20/2017

    The C-891 from PI is a digital motion controller for PIMag® three-phase linear motors. The controller offers extensive functionality in operational data recording, wave generation, ID chip support, and extensive software support. With one motor and one sensor channel, the device is capable of sine-commuted operation, field-oriented current control, and automated detection of the motor phase.

  6. Precision Micro-Translation Stage For Single And Multi-Axis Positioning: M-122 8/24/2016

    PI’s new M-122 is a palm-top-sized micro-translation stage designed with small dimensions and high speeds for single and multi-axis precision positioning. Due to its low-friction, preloaded, precision-ground ball-screw and a non-contacting optical linear encoder, these stages provide higher accuracy and enhanced repeatability in a variety of applications including photonics packaging, fiber positioning, metrology, quality assurance testing, testing equipment, and micromachining.

  7. Controller for Miniature Piezo Stages – E-873 8/1/2016

    PI’s new E-873 controls miniature piezo stages of the Q-motion series for microscopy and photonics applications. Q-motion stages provide nanometer resolution at an affordable price. The E-873 is a benchtop device with options for control cabinet mounting, and has three channels with integrated power amplifiers and an interpolator. The device features a point-to-point motion and actuator mode for nanometer precision positioning at the target position.

  8. Piezo Nanopositioning Stage Features Up To 52mm Travel 6/28/2016

    The N-565 is an ultra-precision linear positioner stage with NEXACT® PiezoWalk® technology, and designed with a subnanometer encoder resolution for high-end applications in bio-nanotechnology, fiber-optics, microscopy, semiconductor testing, metrology, and scientific research in beamlines and laser labs. With long 13 mm, 26 mm, or 52 mm travel ranges, high forces, and stiffness, this stepping drive does not subject to sliding friction or wear.

  9. PILine® Linear Positioning Stage With Ultrasonic Piezomotor: U-521 5/17/2016

    The U-521 is a PILine® stage with an ultrasonic piezomotor designed particularly for applications requiring fast precision positioning such as micromanipulation, automation, biotechnology, sample manipulation, and sample positioning. The positioning stage features a self-locking mechanism, when switched off, for keeping the stage mechanically stable and reducing energy consumption and heat generation.

  10. High-Load Hexapod For Motion Simulation, Stabilization, And Cancellation: H-900KSCO 5/4/2016

    The H-900KSCO is a reference-class, 6-axis positioning system designed for dynamic motion in all degrees of freedom (X, Y, Z, pitch, roll, yaw). This compact hexapod provides linear travel ranges up to 200 mm and rotation to 66 degrees for applications such as motion simulation, industrial production, precision machining, automotive industry, and stabilization of motion on moving vehicles and vessels.