Opto Diode Downloads

  1. Red To Near-IR Enhanced Surface-Mount Photodiode: NXIR-5C Datasheet
    1/22/2018

    The NXIR-5C is a red to near-infrared (NIR) enhanced photodiode ideally designed for laser monitoring, medical diagnostic equipment, industrial automation, scientific measurement, and military applications. The NXIR-5C delivers low reverse bias, high sensitivity at 0.62 A/W @ 850 nm and 0.35 A/W at 1064 nm, low dark current at 1nA, low capacitance of 5 pico-farads (pF) at 10 V, and high shunt resistance greater than 100 MΩ.

  2. 13.5 nm Directly-Deposited Thin-Film Filter Photodetectors: SXUV100TF135B Datasheet
    1/19/2018

    The new SXUV100TF135B 13.5 nm is a directly-deposited thin-film filter photodetectors ideal for electrical performance in many applications, including laser power monitoring, semiconductor photolithography, and metrology systems that utilize extreme ultraviolet light. The SXUV100TF135B is optimized for zero bias voltage operation where low dark current is vital, and it features a high shunt resistance greater than 10 MΩ. It offers excellent stability and robust design for use in extreme ultraviolet environments.

  3. 13.5 nm Directly-Deposited Thin-Film Filter Photodetectors: SXUV100TF135 Datasheet
    1/19/2018

    The new SXUV100TF135 13.5 nm is a directly-deposited thin-film filter photodetectors ideal for electrical performance in many applications, including laser power monitoring, semiconductor photolithography, and metrology systems that utilize extreme ultraviolet light. The SXUV100TF135 is optimized for higher speed reverse bias voltage operation, and features low capacitance at 260 pF with a reverse bias voltage of 12 V. It offers excellent stability and robust design for use in extreme ultraviolet environments.

  4. Single-Channel, Two-Stage, Cooled Infrared (IR) Detector: BXT2-17TF Brochure
    10/17/2017

    Opto Diode offers a range of high performance lead selenide (PbSe) single-channel uncooled and cooled infrared detectors. These B Series IR detectors offer the best balance of performance and attributes for analyzing materials in the one to five micron spectrum. Key features include high signal to noise performance for a wide measurement dynamic range, high sensitivity, and fast response times for mid-IR applications.

  5. Near-Infrared Surface-Mount Photodiode: NXIR-RF100C Datasheet
    2/2/2017

    The NXIR-RF100C is a red and near-infrared (NIR) surface-mount device (SMD) photodiode with spectral response ranging from 320 to 1100 nm. The NXIR-RF100C features an active area of 1 mm2, high responsivity of 0.62 A/W @ 850 nm and 0.35 A/W @ 1064 nm, and an anti-reflective (AR) coated window that provides greater than 98 percent transmission. The device package is ideally designed for laser-monitoring, and rain- and sun-sensor applications in the -40 °C to +125 °C temperature range.

  6. Deep Red Surface-Mount LED: OD-685C Datasheet
    1/24/2017

    The OD-685C, a new deep red, surface-mount device (SMD) light-emitting diode, is designed to deliver outstanding efficiency for applications requiring radiometric measurement with tight spectral bandwidth such as biological analysis, health, science, medical, and veterinary applications. The device has a wide operating temperature range from -65 °C to +125 °C, a typical voltage of 1.8 V with a maximum 2.2 V, and a tight spectral bandwidth of 30 nm at 50 percent.

  7. Low-Noise Extreme Ultraviolet (EUV) Photodetector Datasheet
    10/12/2016

    The SXUV20C is a new low-noise extreme ultraviolet (EUV) photodetector that is specially designed for high stability over long periods of time when exposed to high intensity EUV energy. Features include high photon flux robustness, minimum shunt resistance of 50 MΩ, reverse breakdown voltage (typical) VR: 1R = 1µa 10 volts, and typical capacitance of C: VR = 0V 3nF.

  8. Understanding Detectors With Thermoelectric Coolers
    9/15/2016

    In order to optimize a detector for enhanced performance levels within their designated applications, it is important to understand the heatsinking of the package. A detector’s thermal resistance is minimized by the proper heat sink selection and mounting by using a thermal interface material.

  9. Frequently Asked Questions: Infrared Detectors
    9/15/2016

    This white paper covers most frequently asked questions regarding infrared detectors, and provides the answers for each of them.

  10. Glossary Of Terms For Detectors
    9/15/2016

    This white paper comprises a list of terms and definitions related to detectors.