Lasers Products & Services

  1. Water Cooled Thermal Power/Energy Laser Measurement Sensor For High Powers: 10K-W-BB-45 9/2/2020

    Ophir Photonics offers the 10K-W-BB-45 water cooled thermal power/energy laser measurement sensor designed for very high powers with a 45 mm aperture. The device can measure power from 100W to 11,000W and features a deflecting cone and annular absorber that withstands high power densities to 10kW/cm².

  2. BEAMAGE-M2: Automated M-Squared Measurement System 8/7/2020

    The BEAMAGE-M2 is an automated M-squared measurement system comprising the BEAMAGE-4M, 5 lenses, 3 ND filters, and 2 external beam-steering mirrors. It is the only M2 system on the market equipped with a complete set of 50 mm optics and a sensor aperture of 11.3 x 11.3 mm.

  3. BEAMAGE-4M: Beam Profiling Camera 8/7/2020

    The BEAMAGE-4M is a beam profiling camera designed for accurate profile measurements of very small beams. The camera utilizes a USB 3.0 for the transfer rates up to 10X faster than regular USB 2.0 connections.

  4. PRONTO-250: Portable Laser Power Meter 8/6/2020

    The PRONTO-250 portable laser power meter is a mid to high power probe measuring laser power up to 250 W and is small enough to fit in your pocket. This easy-to-use power meter features a color LCD screen, a friendly user interface, and fully calibrated settings for every wavelength between 248 nm and 2.5 μm (YAG), and a real calibration at 10.6 μm (CO2).

  5. High Accuracy Laser Power Meters 7/15/2020

    Gentec-EO offers a wide range of high accuracy laser power meters suitable for applications that require a precision measurement, from industrial to medical and even scientific uses.

  6. Calibrated Portable Laser Energy Detectors 7/15/2020

    Gentec-EO offers a series of portable pyroelectric energy detectors, photodiode energy detectors, and integrating sphere energy detectors for a variety of laser test and measurement applications.

  7. CMOS Laser Beam Profilers: Beamage Series 7/14/2020

    The Beamage series of laser beam diagnostics instruments features a unique combination of high pixel and large sensor sizes. This allows for accurate characterization of both very small beams and only a few tens of microns to larger beams of several millimeters in width, effectively covering most applications in one package.

  8. ULTRA Series Dichroic Filters 6/17/2020

    The steep edges, maximum transmission, and maximum reflection of ULTRA Series thin-film dichroic filters all translate into minimal loss of light intensity and optimal instrument performance. Each ULTRA Series dichroic filter, polychroic filter, dichroic beamsplitter, or beam combiner is resistant to laser damage and can be designed to work at any angle. All are ideal for use in applications such as fluorescence microscopy, flow cytometry, and Raman spectroscopy.

  9. Compact Measurement System For LED Luminaires: Ophir® FluxGage™ 604 Series 5/12/2020

    The Ophir® FluxGage™ 604 series is a compact measurement system featuring four additional color sensors that are evenly arranged in the bottom of the device delivering further x, y, and CCT data besides the illuminance. The system provides an overview of the color and overall uniformity of the measured light in seconds, allowing for the direct evaluation of LED chips or optical assemblies used for color mixing and beam shaping.

  10. Ophir® Power/Energy Sensor With Very High Damage Threshold: Ophir® L40(500)A-LP2-DIF-35 5/5/2020

    The Ophir® L40(500)A-LP2-DIF-35 is a compact, high damage threshold laser power/energy sensor capable of measuring up to 4kW without the need for water cooling. The Ophir® L40(500)A-LP2-DIF-35 can measure CW lasers up to 500W and pulsed lasers up to 2kJ. The compact design makes it easy to place between optical components when troubleshooting a beam path. The sensor can handle large, unfocused beams of 35mm diameter, as well as narrow, high density beams down to 1mm @ 1kW.