The new Phantom Flex4K from Vision Research is featured as a high-speed camera providing exceptional flexibility with its high frame rate capabilities, and with the ability to adapt to different shooting styles in the cinematography market. Able to provide sharp, detailed images with extremely low noise and high dynamic range, the super-35mm 4K sensor shoots from 15 frames-per-second (fps) up to 1,000 fps at 4K, and almost 2,000 fps at 2K/1080p.
Spectral Instruments has developed a new camera line utilizing CCDs with multiple read ports per CCD for high speed imaging without compromising on the typical specifications that falter when moving to high speed. Utilizing multiple ports (up to 16 per device) cuts down on the number of pixels each port must read, and thus increases read speeds by up to 16x without compromising read noise. Other than the multiple ports, CCD design is essentially unchanged and high pixel full well is retained to give maximum dynamic range when compared to all other modes of high speed imaging.
FLIR offers the FLIR A8200sc and FLIR A8300sc high-sensitivity MWIR cameras designed to produce low-noise HD thermal images for electronics inspection, aerial thermal mapping, non-destructive material testing, and industrial R&D applications. The A8200sc produces crisp, 1.0 megapixel (1024 x 1024) thermal images, while the FLIR A8300sc produces 921,600 pixel (1280 x 720) images, both with very low noise to capture the finest image details.
Recent developments in robotics, clear film production, and new materials testing technologies have raised the demand for using polarization in structural dynamics and high-speed object detection. Since conventional high-speed cameras lack any polarization sensitivity, Photron has developed the new CRYSTA high-speed camera system with polarization sensitivity.
The Oryx 10GigE camera family of machine vision cameras offers the advantages of the latest sensors by supporting transfer speeds up to 10 Gbit/s, enabling the capture of 12-bit images at over 60 FPS at 4K resolution. The Oryx 10BASE-T interface provides reliable image transfer at cable lengths over 50 meters on inexpensive CAT6A. or greater than 30 m on CAT5e.
The OWL SW1.7 digital camera series, designed and manufactured by Raptor Photonics, offers the latest SWIR sensor technology enabling high sensitivity imaging. The OWL SW1.7 CL HS is equipped with a higher frame rate with windowing, 14 bit CameraLink output, minimum 500ns exposure and easy camera control for capturing fast moving objects and active imaging applications.
The Photometrics Prime is the first intelligent scientific CMOS (sCMOS) camera to incorporate a FPGA-based Embedded Signal Processing™ engine (ESP) that enables a number of real-time processing features. Utilizing sCMOS sensor technology, Prime is and an extremely versatile imaging solution for life science imaging applications such as microscopy and high-speed ratiometric imaging.
In order to meet the requirements of the most demanding high-speed imaging applications a balance of high frame rate, image resolution, dynamic range and light sensitivity is required. The FASTCAM SA-X2 high-speed camera system has been designed to provide a careful balance of these requirements.
|
|
|
|
|
|
|
|
|