1. Low Profile Rotary Air Bearing Stages With Superior Accuracy: A-635/A-637 PIglide

    PI offers new A-635/A-637 PIglide low profile, rotary air bearing stages designed with superior accuracy for high-end industrial applications such as inspection, metrology, calibration, and scanning. The stages have no rolling or sliding elements and feature frictionless, non-contact motion for negligible reversal error, better wobble, eccentricity, and velocity stability. They also feature a virtually unlimited life, as there are no parts that wear or require maintenance.

  2. Avalanche Photodiodes (APDs)

    First Sensor offers avalanche photodiodes (APDs), or diodes with an internal gain mechanism. These diodes are available with different housings, and components optimized for the blue, red, and infrared spectral range between 905 and 1064 nm. 

  3. Detect Ionizing Radiation: X Photodiode Series

    First Sensor’s X series of photodiodes is utilized to detect alpha, beta, gamma, and X-ray radiation either directly through the absorption in the crystal lattice or indirectly through the measurement of the luminescence radiation of a scintillation crystal. The series features optimized silicon PIN photodiodes that form wide, fully depleted space-charge regions to guarantee maximum radiation absorption, even at low reverse voltages.

  4. Compact Modular Cameras For Robust Applications

    First Sensor offers rugged, compact cameras designed to withstand the toughest conditions, such as extreme heat, cold, or permanent vibrations. Each camera features a modular design with different interfaces and data formats for simple integration. 

  5. Digital Differential Pressure Sensors: HTD Series

    First Sensor offers the HTD series of piezoresistive differential pressure sensors for use in low pressure ranges and demanding space constrictions. These high-performance, high-accuracy sensors allow for flexible direct manifold assemblies. A digital SPI interface and analog voltage output provides the maximum flexibility for any type of application.

  6. Shortwave Infrared Thermal Camera Core: Tau SWIR

    FLIR OEM’s Tau SWIR thermal camera core delivers outstanding shortwave infrared image quality and performance for applications ranging over a variety of imaging and light level conditions, including in hyperspectral instrumentation, silicon inspection, electro-optical payloads, art restoration, and portable imaging. With a high resolution 640×512 ISC1202 InGaAs 15-micron pitch focal plane array (FPA), compact form factor, light weight (<81 grams), and less than 3.2 W power consumption (at room temperature) Tau SWIR has the SWaP that OEMs need.

  7. Long Wave Infrared Thermal Camera Core: Tau 2

    The Tau 2 from FLIR is loaded with advanced electronics and image processing features that improve detail and contrast, this camera offers full radiometry, increased sensitivity (<30 mK), and 640/60 Hz frame rates.

  8. Mid-Wave Infrared (MWIR) Cooled Camera Module: Neutrino™

    FLIR offers the Neutrino™ - a high performance cooled mid-wave infrared (MWIR) core designed for simple integration when SWaP design constraints and performance are needed. This camera is FLIR’s smallest and lightest OEM cooled camera core, incorporating the FLIR’s full suite of advanced image processing algorithms such as customizable AGC and Detailed Digital Enhancement (DDE).

  9. LWIR Micro Thermal Camera Module: FLIR Lepton®

    The FLIR Lepton® is a radiometric-capable long-wave infrared (LWIR) camera module that is smaller than a dime. It is specifically designed to fit inside a smartphone, mobile devices, and other electronics like IR sensors and thermal imagers. Available at one tenth of the cost of traditional IR cameras, these cameras feature focal plane arrays of 160 x 120 or 80 x 60 active pixels, and capture accurate, calibrated, and noncontact temperature data in every pixel of each image.

  10. Thermal Vision Automotive Development Kit (ADK): FLIR ADK™

    The FLIR ADK™ is a new thermal vision automotive development kit (ADK) built around the FLIR Boson® thermal camera core. This kit offers a cost effective solution for developing the next generation of automotive thermal vision and advanced driver assistance systems (ADAS). The system creates images from heat, making this technology the best for pedestrian detection, identifying people in cluttered environments, and giving analytics critical information for automated decisions.