Opto Diode News

1. Opto Diode’s IR Detectors And IR Emitters Available On DigiKey 9/21/2023

   Opto Diode Corporation, an ITW company, announces convenient online access to seven key infrared (IR) products via the DigiKey website.

2. Opto Diode Introduces High-Performance Quad Electron Detector 5/15/2023

   Opto Diode Corporation introduces a high-performance quad electron detector, the AXUVPS7, with a total circular active area of 146 mm² (active area per element is 36.5 mm²).

3. Opto Diode Introduces Large Electron Detector 12/19/2022

   Opto Diode Corporation introduces the AXUV100G, a 100 mm x 100 mm active area electron detection device specially designed for use in radiation detection applications.

4. Opto Diode UV-Enhanced Photodetectors For Medical Applications 8/16/2022

   Opto Diode Corporation provides a wide variety of ultraviolet-enhanced detectors designed for vital medical applications. Photodiodes, operating from 190nm to 400nm, are available in circular and square configurations.

5. Opto Diode Provides High-Power LEDs For Military/Aerospace/Defense Apps 6/20/2022

   Opto Diode Corporation, an ITW company, offers a variety of high-power, infrared light-emitting diodes (IRLEDs) and ultra-high-power near-infrared LED illuminators designed for military, aerospace, and defense.

6. Opto Diode’s High-Power GaAlAs IRLED Illuminator For Covert Aircraft Lighting 5/9/2022

   Opto Diode Corporation introduces an infrared light-emitting diode (IRLED) in a convenient TO-66 package for heatsink attach, the OD-669. The high-power gallium aluminum arsenide (GaAlAs) IRLED illuminator features a peak emission of 880 nm with an extremely wide angle of emission.

7. Opto Diode Introduces 2-Stage, Cooled Infrared Detector 9/17/2021

   Opto Diode Corporation, an ITW company, introduces the BXT2S-68TE, a thermoelectrically-cooled (TEC), two-stage infrared (IR) detector developed for gas analysis, emissions monitoring, and process control.

8. Opto Diode Introduces High-Performance, Single-Channel Uncooled Infrared Detector 5/17/2021

   Opto Diode Corporation, an ITW company, introduces a single-channel, uncooled infrared (IR) detector, the BXP-25E. Specially designed for fire and flame detection, the high-performance, lead selenide (PbSe) detector offers peak sensitivity between 3.6 µm and 3.8 µm and is available in a TO5 package with a flat sapphire window.

9. Opto Diode Introduces Two-Stage, Cooled Mid-Infrared Detector 3/11/2021

   Opto Diode Corporation, introduces a high-performance, two-stage, cooled, lead selenide (PbSe) detector that operates in the mid-infrared (IR) spectral region with peak sensitivity between 4.3 and 4.5µm. The cooler on the BXT2S-28T allows the detector element to operate as low as -45 °C to maximize detectivity (D*). The device also features excellent responsivity of 7.5 x 104 V/W (typical). The exceptionally reliable detector provides the highest sensitivity when monitoring small changes in gas mixtures.

10. Opto Diode’s New UV-Enhanced Detector With 5.5 mm Diameter Active Area 11/16/2020

    Opto Diode Corporation, an ITW company, announces an ultraviolet-enhanced detector featuring a 5.5 mm diameter active area, the UVG20S. The photodiode is ideal for UV detection between 190 nm  to 400 nm spectral wavelengths with a full spectrum of 190 nm out to 1000 nm. The device features stable responsivity over wide temperature ranges and features 100% internal quantum efficiency from 200 to 400nm.