Biotechnology & Medical Products

  1. 5 Axis Micro Drilling Scanhead
    2/1/2017

    The new 5 Axis Micro Drilling Scanhead is designed with high resolution, precision, and accuracy for applications requiring infinitely flexible scan beam pattern delivery. The scanhead features a wide precession angle up to 20° for variable taper and shapes.

  2. Deep Red Surface-Mount LED: OD-685C
    1/24/2017

    Opto Diode presents the OD-685C, a new deep red, surface-mount device (SMD) light-emitting diode (LED). This new device features 2.0 mW of radiant power at a forward current of 20 mA, a peak wavelength of 685 nm, and a radiant efficiency of 56 percent. The LED is designed to deliver outstanding efficiency for applications requiring radiometric measurement with tight spectral bandwidth such as biological analysis, health, science, medical, and veterinary applications.

  3. Compact sCMOS Camera
    1/5/2017

    The new pco.panda 4.2 is a sCMOS sensor camera system designed to provide high quantum efficiency with low dark noise for applications including localization microscopy (PALM, STORM, dSTORM, GSDIM), light sheet fluorescence microscopy (LSFM, SPIM), structured illumination microscopy (SIM), and more. It also is housed in a compact, 65 x 65 x 65 mm3 package.

  4. HD Format Digital SWIR InGaAs Camera: OWL 1280
    11/3/2016

    The OWL 1280 from Raptor Photonics is a digital short-wave infrared (SWIR) InGaAs camera in HD format, ideal for surveillance and scientific imaging applications including range finding, vision enhancement, astronomy, and hyperspectral imaging. The camera utilizes a 1280 x 1280 sensor for SCD that offers visible extension from 0.4 µm to 1.7 µm, and 10 µm x 10 µm pixel pitch for the highest resolution imaging.

  5. Controller for Miniature Piezo Stages – E-873
    8/1/2016

    PI’s new E-873 controls miniature piezo stages of the Q-motion series for microscopy and photonics applications. Q-motion stages provide nanometer resolution at an affordable price. The E-873 is a benchtop device with options for control cabinet mounting, and has three channels with integrated power amplifiers and an interpolator. The device features a point-to-point motion and actuator mode for nanometer precision positioning at the target position.

  6. Phantom® VEO Product Family
    7/20/2016

    The new Phantom® VEO family of cameras from Vision Research is made up of four high speed cameras designed to provide information on high speed events within scientific and industrial applications. The VEO710 and VEO410 models feature frame rates exceeding 7,000 fps, making these models ideal for traditional high-speed motion analysis. The four-megapixel VEO640 and VEO340 are optimized for scientific imaging applications where higher resolutions are important. All models are now available with 10 Gb Ethernet connectivity.

  7. Piezo Nanopositioning Stage Features Up To 52mm Travel
    6/28/2016

    The N-565 is an ultra-precision linear positioner stage with NEXACT® PiezoWalk® technology, and designed with a subnanometer encoder resolution for high-end applications in bio-nanotechnology, fiber-optics, microscopy, semiconductor testing, metrology, and scientific research in beamlines and laser labs. With long 13 mm, 26 mm, or 52 mm travel ranges, high forces, and stiffness, this stepping drive does not subject to sliding friction or wear.

  8. NIT, WDR InGaAs SWIR Camera Family
    6/16/2016

    The New Imaging Technologies' (NIT) wide dynamic range (WDR), InGaAs shortwave infrared (SWIR) sensors and camera systems are designed with the purpose of delivering a dynamic range greater than 140 dB in a single snapshot without any processing or tone mapping. 

  9. Thin Film Coating Solutions And Processes
    5/19/2016

    DSI is capable of producing a variety of durable, reliable, and heat resistant optical coatings within the ultraviolet, visible, near-infrared, shortwave infrared, mid-wave infrared, and long-wave infrared spectral wavelengths. Along with standard products, DSI is able to work in close collaboration with customers in order to develop innovative coatings that meet specific requirements within real-world applications.

  10. PILine® Linear Positioning Stage With Ultrasonic Piezomotor: U-521
    5/17/2016

    The U-521 is a PILine® stage with an ultrasonic piezomotor designed particularly for applications requiring fast precision positioning such as micromanipulation, automation, biotechnology, sample manipulation, and sample positioning. The positioning stage features a self-locking mechanism, when switched off, for keeping the stage mechanically stable and reducing energy consumption and heat generation.