positioning-equipment-news

  1. Motorized Miniature Translation Stage Is Affordable And Precise, Newly Released By PI
    12/14/2018

    The L-408 linear stage strikes a good balance of load capacity, precision, and low cost. It has applications in research and industry including optics, bio-tech, and assembly of miniature components and photonics instrumentation.

  2. XY Positioning Table Wtih Linear Motors And Encoders Provides High Accuracy And Velocity
    10/2/2018

    The V-738 XY translation stage is designed to meet the highest positioning accuracy demands, for applications such as industrial automation, laser processing and flat panel display test and manufacturing. The mechanical design is based on a three piece arrangement for improved geometric performance. In contrast to XY-stage assemblies where two single axis translation stages are bolted together, the integrated, planar design of the V-738 provides better orthogonality (<100µrad) and straightness/flatness (2µm).

  3. 160 Page Catalog n Piezo Linear Motors, Rotation Stages, And Multi-Axis Motion Systems
    9/12/2018

    Piezo motors provide excellent dynamic properties, such as high acceleration and fast start/stop behavior, along with nanometer precision and stability. In contrast to traditional piezo mechanisms, like piezo stacks and piezo flexure stages, piezo motors are not limited to short travel ranges.

  4. New Miniature Hexapod For Photonics Alignment Provides Dynamics And Precision, And Automated Alignment Algorithms
    5/31/2018

    PI has added a high dynamics model to its range of compact hexapods. Designed for photonics alignment applications, the hexapod provides 6 degrees of freedom, actuator resolution of 5 nanometers and repeatability as good as 60 nanometers, while providing velocities to 20mm/sec. Sustaining loads to 5kg, the new H-811.F2 features a removable magnetic kinematic plate to accelerate workflow with different fiber optics components. Its compact size, large travel range of up to 34mm for linear motions and up to 42° for rotary motions, and a user programmable pivot point facilitate work with fiber optic and photonics components. 

  5. New High Performance High Load Linear Stages Family, Ballscrew/Linear Motor Options For Industrial Applications
    5/22/2018

    The new reference-class linear stages family, L-417 and V-417, from precision nanopositioning global leader PI (Physik Instrumente), are available in ballscrew and linear motor configurations, both cost effective designs, offering high resolution with improved tracking performance, smaller tracking error, and improved settling time.  Applications for both include high demands on dynamics, precision, smooth scan motion, short settling times, and low tracking error, such as laser cutting, scanning, digital printing, electronics assembly and inspection, AOI (Automatic Optical Inspection), automation, and flat panel manufacturing.

  6. New Industrial Automation/Motion Control Catalog On High-Precision Linear And Rotary Positioning Systems
    4/27/2018

    Motion control and nano precision positioning systems leader PI (Physik Instrumente) released a new comprehensive catalog of linear and rotary positioning systems engineered and manufactured for industrial precision automation. The products covered in the catalog address industries such as semiconductor production/inspection, laser material processing, automated optical inspection (AOI), and precision opto-mechanical alignment and assembly. PI’s in-house designed and manufactured PIMag linear motor stages and PIglide air bearing technologies and high performance EtherCat®-based industrial precision motion controllers are some of the technologies featured in this catalog.

  7. New High-Speed Optical Power Meter Supports Fast Photonics Alignment Applications
    4/25/2018

    The new F-712.PM1 high speed optical power meter from precision photonics alignment manufacturer PI (Physik Instrumente) converts optical signals and currents of photodiodes into a high resolution, logarithmic analog voltage signal. Its high bandwidth of 20kHz enables faster optical alignment, when used in conjunction with PI’s high speed FMPA photonics alignment systems for SiP (Silicon Photonics) applications. The extended wavelength range of 400 to 1550nm allows working in both the visible and infrared range without switching.

  8. Motion Simulation For Image Stabilization, Mars-Rover Proven Actuators, Smart Flexible Transducers: All At PI’s Aerodef Booth #1053
    3/26/2018

    PI (Physik Instrumente), a leader in precision motion control solutions, will showcase an application of its 6-axis hexapod for motion simulation such as used to optimize stabilization systems on vessels,  drones and even for cell phone cameras. PI hexapods are available in a variety of sizes with bases ranging from 100mm to 1m, different stiffness configurations, and supportive of loads from 2 kg to 1,000+ kg.

  9. Fast Silicon Photonics Alignment Engine Is A 2018 Photonics Integrated Circuits Awards Finalist – Polls Open Now
    2/23/2018

    PI has the multi award-winning solution for critical alignment speed and accuracy to a nanoscale level for projects from planar testing to packaging. Honored to be nominated a second year consecutive year, the FMPA Fast Multichannel Photonics Alignment system is a 2018 PIC Awards finalist, which rewards excellence, innovation, and success in the worldwide PIC industry. Voting is open until March 23rd, with the winners of this prestigious award announced on April 10th at the PIC International Conference in Brussels, Belgium. An R&D Top 100 Most Significant Products of the Year winner and Lightwave Innovation Reviews award winner, the FMPA was recently showcased at Photonics West 2018 in San Francisco.

  10. MKS Introduces New Flagship Newport Digital Motion Controller
    2/20/2018

    MKS Instruments, Inc. announces the release of the Newport XPS-D Universal Motion Controller and Driver, the new flagship of the  Newport high-performance 8 axis motion controllers. Equipped with the new universal digital driver card, XPS-DRV11, the XPS-D is capable of controlling a wide variety of motor types including stepper, DC, DC brushless and direct drive motors. The XPS-D controller is compatible with all Newport electromechanical stages and provides backward-compatibility to the Newport XPS-Q driver cards and API’s.