ODA-5W-100M: Photodetector Amplifier Combo
Opto Diode Corporation, a U.S. manufacturer of advanced performance photodetectors and visible and infrared LEDs, announces the new ODA-5W-100M Photodetector Amplifier Combination with 100Mohm gain
Click Here To Download:
•Datasheet: ODA-5W-100M Photodetector Amplifier Combo
Opto Diode Corporation, a U.S. manufacturer of advanced performance photodetectors and visible and infrared LEDs, announces the new ODA-5W-100M Photodetector Amplifier Combination with 100Mohm gain. Packaged in a standard TO-5 can, the photodetector's visible wavelength responsivity at 660 nm is 40V/µW. The new combination detector-preamp's frequency response is 1 KHz with extremely low dark offset at /-1mV with dark offset noise at 5mV RMS. Operating specifications are at /- 15 V, 25 degrees C.
The Photodetector Amplifier Combination has an active area that is 0.100 inch in diameter. The TO-5 package makes the Photodetector easy to integrate and suitable for a variety of applications such as fluorescence and spectroscopy. The Photodetector Amplifier Combination is also ideal for any low-light-level tasks where electrical noise levels can affect the photodiode signal if the detector and amplifier are separate components on a PCB. Standard pricing is $25 each in quantities of 1000 pieces. Different gains are also available, depending on customer requirements.
Opto Diode's new photodetector amplifier combination is produced in their on-shore, Southern California wafer fabrication facility. The company is also a premier supplier of standard TO-packaging and custom infrared (IR) and visible LEDs.
Click Here To Download:
•Datasheet: ODA-5W-100M Photodetector Amplifier Combo