Product/Service

BeamCheck™ Beam Profiling System For Additive Manufacturing

Source: Ophir Photonics

BeamCheck™ Beam Profiling System For Additive Manufacturing

The Ophir Photonics BeamCheck™ beam profiling system is designed specifically for measuring critical laser beam parameters in laser-based additive manufacturing systems. A CCD camera is used for spatial measurements, and an NIST-traceable power sensor is utilized to provide a complete analysis of laser power density profiles.

Contact The Supplier

The BeamCheck camera is located at the build plane so that accurate focal spot size, laser power, and laser power density measurements and their changes over time. The beam splitter directs a small percentage of the beam into the camera, while the majority of the beam is directed to the integrated power sensor.

Additional BeamCheck features include:

  • 0.1 to 600 Watt integrated power sensor
  • For fiber lasers; 1060 to 1080 nm wavelength range
  • Power densities to >3 MW/cm2
  • Spot sizes from 37 um to 3.5 mm
  • Multiple frames per second
  • Additive manufacturing system focal length from 200 mm to >400 mm

Download the datasheet and check out the video below for more information on the BeamCheck beam profiling system.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Contact The Supplier