Sensors / Detectors Products

  1. Detect Ionizing Radiation: X Photodiode Series
    3/5/2018

    First Sensor’s X series of photodiodes is utilized to detect alpha, beta, gamma, and X-ray radiation either directly through the absorption in the crystal lattice or indirectly through the measurement of the luminescence radiation of a scintillation crystal. The series features optimized silicon PIN photodiodes that form wide, fully depleted space-charge regions to guarantee maximum radiation absorption, even at low reverse voltages.

  2. Digital Differential Pressure Sensors: HTD Series
    3/1/2018

    First Sensor offers the HTD series of piezoresistive differential pressure sensors for use in low pressure ranges and demanding space constrictions. These high-performance, high-accuracy sensors allow for flexible direct manifold assemblies. A digital SPI interface and analog voltage output provides the maximum flexibility for any type of application.

  3. Photodetectors With Integrated, Directly-Deposited Thin-Film Filters
    1/19/2018

    Opto Diode introduces two new 13.5 nm directly-deposited thin-film filter photodetectors ideal for electrical performance in many applications, including laser power monitoring, semiconductor photolithography, and metrology systems that utilize extreme ultraviolet light. The SXUV100TF135 and SXUV100TF135B feature a 100 mm2 active area, detection capabilities between 12 nm and 18 nm, and a responsivity of 0.09 A/W at 13.5 nm.

  4. Autoclavable Eternaloc® Connectors And Sensor Housings For Medical Applications
    1/9/2018

    SCHOTT Electronic Packaging manufactures custom-made, hermetically-sealed, autoclavable Eternaloc® connectors and feedthroughs made with Glass-to-Metal Sealing (GTMS) or Ceramic-to-Metal Sealing technology (CerTMS®). SCHOTT also produces provide sensor housings offering complete protection with a hermetic seal that helps prevent moisture from seeping into the the housing and causing damage and corrosion to internally-housed electronics components. A wide selection of Transistor Outline (TO) housings are also available.

  5. Single-Channel, Two-Stage, Cooled Infrared (IR) Detector: BXT2-17TF
    10/19/2017

    Opto Diode now offers the new BXT2-17TF single-channel infrared (IR) detector designed to provide excellent sensitivity for industrial carbon monoxide (CO) detection in harsh environments. With an integrated 4.67 µm optical bandpass silicon filter and a thermistor, this thermoelectrically-cooled device features excellent performance and high reliability for long life use.

  6. Chemically Strengthened Glass For Displays, Sensors, And Scanners: AGC Dragontrail™
    5/22/2017

    Abrisa Technologies now offers the innovative High Ion-Exchange (HIE™) Asahi Glass Corporation (AGC) Dragontrail™ aluminosilicate glass for cover glass, display, sensor, and scanner technologies. Dragontrail supports low profile, reduced weight, portable field, and industrial devices with a toughness of 6x that of soda lime float. It is designed to enhance the usable lifetime of high contact touch displays, and industrial image sensors, document scanners, and on board vehicular and avionics displays.

  7. Very High Power Water-Cooled Thermal Sensor: 15K-W-BB-45
    4/21/2017

    Ophir Photonics’ new 15K-W-BB-45 is a high damage threshold sensor designed to measure continuous laser power from 100 W to 15,000 W over the spectral range from 0.8 to 2 µm and 10.6 µm. This compact, water-cooled, thermal laser power measurement sensor features a deflecting cone and annular absorber that tolerates high power densities up to 10 kW/cm2.

  8. Deep Red Surface-Mount LED: OD-685C
    1/24/2017

    Opto Diode presents the OD-685C, a new deep red, surface-mount device (SMD) light-emitting diode (LED). This new device features 2.0 mW of radiant power at a forward current of 20 mA, a peak wavelength of 685 nm, and a radiant efficiency of 56 percent. The LED is designed to deliver outstanding efficiency for applications requiring radiometric measurement with tight spectral bandwidth such as biological analysis, health, science, medical, and veterinary applications.

  9. CMOS Sensor Family
    1/23/2017

    For several decades Canon has been developing and manufacturing advanced sensors with state-of-the-art technologies for exclusive use in Canon products and are a critical driving force behind many our successful product lines, ranging from consumer products all the way up to high-end business and industrial solutions.

    As part of a new business platform, Canon USA is now offering select advanced sensors to solutions providers, integrators and others who are looking to create unique products and solutions. To learn more, please contact Canon USA at:
    sensor_info@cusa.canon.com.

    Visit Canon USA FPS at the following shows to learn more about their CMOS sensors and to discuss your specific applications:

    Show 2018 Location 2018 Exhibit Dates
    CES (Consumer Electronics Show) Las Vegas, NV 1/9-1/12
    SPIE Photonics West The Moscone Center, San Francisco, CA 1/30-2/1
    SPIE Defense + Commercial Sensing Expo Orlando, Florida 4/17-4/19
    AIA Vision Show 2018 Boston, MA 4/10-4/12
    SPIE Astronomical Telescopes + Instrumentation Austin, TX 6/12-6/14
    Sensors Expo San Jose, CA 6/26-6/28
    SPIE Optics + Photonics San Diego, CA 8/21-8/23
    International Manufacturing Technology Show (IMTS) Chicago, IL 9/10-9/15
    Image Sensors Americas San Fransisco, CA 10/10-10/12

     

  10. Pyroelectric DLaTGS Detectors
    1/12/2017

    LASER COMPONENTS offers Deuterated Lanthanum α Alanine doped TriGlycine Sulphate (DLaTGS) detectors that are ideally suited for FTIR applications. Designed with the highest possible performance and the most effective pyroelectric effects, these detectors can be produced with any configuration, including VM configurations and CM configurations.