Product/Service

Wide Band 2X2 Optical Switch

Wide Band 2X2 Optical Switch
The WX40202 is an integrated, wideband, low loss, non-blocking, latching, 2X2 optical switch designed for wide-band wavelength switching applications in the 1200 to 1620 nm telecommunications band
N/A is an integrated, wideband, low loss, non-blocking, latching, 2X2 optical switch designed for wide-band wavelength switching applications in the 1200 to
1620 nm telecommunications band. It is ideally suited for applications in fiber optic telecommunications and HFC C ATV systems. It is packaged in a rugged anodized aluminum housing with 16 pin integral electrical connector and 4 pigtail fiber leads.

The switching mechanism in N/A is activated by applying a latching pulse to either the "Set" or "Reset" lines. Once the switch latches in either the "Set" or
"Reset" state, no further power is required to maintain the switch state. In the event of a power failure, the switch remains latched in either the "Set" or "Reset" state.

This device is characterized by its low insertion loss, flat wavelength response, high isolation between switched ports, ruggedness and high reliability. It is ideally suited for long haul, metropolitan and local area fiber optic networks including WDM, DWDM, OADM systems, protection switching and optical component testing.

Features:

  • Optical Bandwidth 1200 - 1620 nm
  • Switch Voltage + 5 volts
  • Switch Current per "Set" and
  • "Reset" segment 100 mA
  • Maximum Optical
  • Input Power + 20 dBm
  • Optical Input Return Loss < -40 dB
  • Insertion Loss < 2.0 dB
  • Cross Talk (Between "ON" and "OFF" Channels) > 40 dB
  • Polarization
  • Dependent Loss < 0.2 dB
  • Switching Speed < 10 milliseconds
  • Operating Temperature Range -40 to +85°C

<%=company%>, 2665 South Bayshore Dr., Suite 501, Miami, Florida 33133. Phone: 305-644-7600; Fax: 305-859-9090.