Solutions For Imaging, Sensing, And Laser Scanning Applications

Solutions For Imaging, Sensing, And Laser Scanning Applications

Explore custom coating services and innovative total solutions of coated and fabricated technology glass for imaging, sensing, and laser scanning applications.

Our coating solutions provide excellent optical performance with considerations for large angles of incidence to 52 degrees, laserline signal isolation, low loss throughput for VIS-NIR, SWIR, MWIR and LWIR spectrums, custom colors or neutrality, polarization/phase performance and enhancements for fitness-for-use: outdoors, at sea, mobile, hot, humid, and cold industrial or field environment, autoclave or chemical cleaning, frequent contact, or field use handling.

As a Total Solution Partner, we provide custom coating solutions tailored to your specific application as well as standard coatings for anti-reflection, reflection, beam splitters, laser use, edge and dichroic, selectively absorptive/low emissivity coatings, transparent conductive ITO heater, and other optical coating solutions for use from the UV to the Far-Infrared.

Coatings may be applied to glass, semi-format wafers, sensor caps, crystalline and IR materials, materials of our supply and customer furnished material. Enhancements attributes available: easy-to-clean oleo and hydrophobicity, low CTE, autoclaveability, thermal shock resistance, “bond” friendly coatings and screen-printed graphics, damage and impact resistant HIE™ aluminosilicates, ultra-thin and lightweight glass < 0.2mm, HIE™ chemical strengthening, corrosion resistance and more.



(Ultra-Thin, Lightweight, Heat Resistant, Anti-Fogging)

  • ITO Heaters – Anti-Fogging, De-Icing, High Transparency

  • SCHOTT Borofloat® 33 – High Transparency, Low CTE, Chemical Resistance, Thermal Resilience

  • HIE™ Aluminosilicates (<0.4mm) – Lightweight, Slim, Damage/Scratch Resistant
  • Corning® Gorilla® Glass
  • SCHOTT AS 87
  • Low Fluorescence, Low Alkaline, Special Materials
  • Other Optical Glass & Semi-Format Wafers Upon Request
  • Ultra-Thin Glass (< 0.4mm) – Flat Optics with
  • Minimal Ghosting, Slim Profile
  • AGC EN-A1
  • Corning® Eagle® XG
  • SCHOTT D263®
  • Soda Lime Float
  • Fused Silica – UV Transmitting, High Thermal Resistance, Bio-Compatibility

Learn more about glass materials.



(200nm-20 microns. Reflectance Down to 0.05%)

  • Wide Angle (AOI = 0-52 degrees)
  • V-coat & Laserline (200nm-20 microns)
  • Broadband (UV-Visible, Visible NIR, NIR, SWIR, MWIR, LWIR)
  • Infra-Red (3-20 microns)
  • Autoclaveable Coatings
  • Bio/Chemical Compatible
  • Oleo/Hydrophobic & Other Options

Learn more about anti-reflective and non-glare glass.



(On Uncoated Glass, Wafers, Filter Glass, Metal)

  • Bandpass, Signal Selective
  • Cut-On/Off, Edge, Long Wave Pass (LWP), Short
  • Wave Pass (SWP)
  • Color, RGB, CYM, Dichroic
  • Color Temperature
  • Cold Mirrors, Visible Block/ IR Pass
  • Hot Mirrors, IR Block/Visible Pass
  • UV/IR blocking, Solar Suppression
  • Covert, Semi-Covert, Blackeye
  • Custom Specialty Filters

Learn more about filters.