Scientists Devise Catalyst That Uses Light To Turn Carbon Dioxide To Fuel
Researchers find new way to convert carbon dioxide into a usable fuel source.
The concentration of carbon dioxide in our atmosphere is steadily increasing, and many scientists believe that it is causing impacts in our environment. Recently, scientists have sought ways to recapture some of the carbon in the atmosphere and potentially turn it into usable fuel — which would be a holy grail for sustainable energy production.
In a recent study from the U.S. Department of Energy’s (DOE) Argonne National Laboratory, scientists have used sunlight and a catalyst largely made of copper to transform carbon dioxide to methanol. A liquid fuel, methanol offers the potential for industry to find an additional source to meet America’s energy needs.
The study describes a photocatalyst made of cuprous oxide (Cu2O), a semiconductor that when exposed to light can produce electrons that become available to react with, or reduce, many compounds. After being excited, electrons leave a positive hole in the catalyst’s lower-energy valence band that, in turn, can oxidize water.
“This photocatalyst is particularly exciting because it has one of the most negative conduction bands that we’ve used, which means that the electrons have more potential energy available to do reactions,” said Argonne Distinguished Fellow Tijana Rajh, an author of the study.
Previous attempts to use photocatalysts, such as titanium dioxide, to reduce carbon dioxide tended to produce a whole mish-mash of various products, ranging from aldehydes to methane. The lack of selectivity of these reactions made it difficult to segregate a usable fuel stream, Rajh explained.
“Carbon dioxide is such a stable molecule and it results from the burning of basically everything, so the question is how do we fight nature and go from a really stable end product to something useful and energy rich,” Rajh said.
The idea for transforming carbon dioxide into useful energy comes from the one place in nature where this happens regularly. “We had this idea of copying photosynthesis, which uses carbon dioxide to make food, so why couldn’t we use it to make fuel?” Rajh said. “It turns out to be a complex problem, because to make methanol, you need not just one electron but six.”
By switching from titanium dioxide to cuprous oxide, scientists developed a catalyst that not only had a more negative conduction band but that would also be dramatically more selective in terms of its products. This selectivity results not only from the chemistry of cuprous oxide but from the geometry of the catalyst itself.
“With nanoscience, we start having the ability to meddle with the surfaces to induce certain hotspots or change the surface structure, cause strain or certain surface sites to expose differently than they are in the bulk,” Rajh said.
Because of this “meddling,” Rajh and Argonne postdoctoral researcher Yimin Wu, now an assistant professor at the University of Waterloo, managed to create a catalyst with a bit of a split personality. The cuprous oxide microparticles they developed have different facets, much like a diamond has different facets. Many of the facets of the microparticle are inert, but one is very active in driving the reduction of carbon dioxide to methanol.
According to Rajh, the reason that this facet is so active lies in two unique aspects. First, the carbon dioxide molecule bonds to it in such a way that the structure of the molecule actually bends slightly, diminishing the amount of energy it takes to reduce. Second, water molecules are also absorbed very near to where the carbon dioxide molecules are absorbed.
“In order to make fuel, you not only need to have carbon dioxide to be reduced, you need to have water to be oxidized,” Rajh said. “Also, adsorption conformation in photocatalysis is extremely important — if you have one molecule of carbon dioxide absorbed in one way, it might be completely useless. But if it is in a bent structure, it lowers the energy to be reduced.”
Argonne scientists also used scanning fluorescence X-ray microscopy at Argonne’s Advanced Photon Source (APS) and transmission electron microscopy at the Center for Nanoscale Materials (CNM) to reveal the nature of the faceted cuprous oxide microparticles. The APS and CNM are both DOE Office of Science User Facilities.
A paper based on the study, “Facet-dependent active sites of a single Cu2O particle photocatalyst for CO2 reduction to methanol,” appeared in the November 4 online edition of Nature Energy. Other contributors to the study include Argonne’s Ian McNulty, Cong Liu, Kah Chun Lau, Paul Paulikas, Cheng-Jun Sun, Zhonghou Chai, Jeff Guest, Yang Ren, Vojislav Stamenkovic, Larry Curtiss and Yuzi Liu. Qi Liu of the City University of Hong Kong also contributed.
The work was funded by an Argonne Laboratory-Directed Research and Development grant and by the DOE’s Office of Science.
About Argonne’s Center for Nanoscale Materials
The Center for Nanoscale Materials is one of the five DOE Nanoscale Science Research Centers, premier national user facilities for interdisciplinary research at the nanoscale supported by the DOE Office of Science. Together the NSRCs comprise a suite of complementary facilities that provide researchers with state-of-the-art capabilities to fabricate, process, characterize and model nanoscale materials, and constitute the largest infrastructure investment of the National Nanotechnology Initiative. The NSRCs are located at DOE’s Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, Sandia and Los Alamos National Laboratories. For more information about the DOE NSRCs, visit https://science.osti.gov/User-Facilities/User-Facilities-at-a-Glance.
About The Advanced Photon Source
This research used resources of the Advanced Photon Source, a U.S. DOE Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
About Argonne National Laboratory
Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation’s first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America’s scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science.
About The U.S. Department of Energy’s Office of Science
The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit https://energy.gov/science.
Source: Argonne National Laboratory