Iridian Spectral Technologies has designed and manufactured a wide range of dielectric optical filters for imaging and machine vision applications. Featuring steep edges, high transmission values, and high durability, these color filters can be used to improve contrasts, and isolate spectral regions and colors in images.
The Nexview™ 3D optical profiler microscope stands out amongst competitive products by its ability to measure the topography of virtually any surface, irrespective of roughness, large steps and segments, thin films, steep slopes, with feature heights ranging from < 1 nm up to 20000 µm. It does all this in 3D, without contact, and provides the best qualities of other profiling technologies (stylus, confocal, focus scanning) without their limitations.
FLIR offers the FLIR X6900sc: the world’s fastest 640 x 512 resolution thermal camera for high-speed science applications. This thermal imager is designed to record 1000 fps at full resolution onto the camera RAM for up to 26 seconds.
Bristol Instruments’ model 771 is a high-resolution laser spectrum analyzer that measures the spectral characteristics of CW and high-repetition rate pulsed lasers that operate from 375 nm to 12 μm. Laser wavelength is measured to +/- 0.0001 nm and spectral resolution is as high as 2 GHz.
The GM-1000 series of digital encoder galvano scanners is comprised of four different models with variations in beam diameter, scan angles, small step response, and resolution. Each model has a compact physical profile, super low thermal drift, and extreme high resolution, precision, and accuracy.
Hyperspectral imaging (HSI) is used for many applications including satellite imaging and air reconnaissance. HSI is usually executed with bulky hyperspectral-imaging cameras that are sensitive to misalignment, very expensive, and use prisms or gratings as dispersive elements. An alternative method of HSI is the combination of linear variable bandpass filters (LVBPFs) with silicon detectors. This allows for very compact, robust, and affordable HSI detectors that offer several advantages over conventional approaches.
Optics Balzers has successfully developed and tested a special dielectric layer system with PARMS coating technology, making it possible to manufacture 45°-HR mirrors for 1030nm applications with an established destruction threshold of 0.44J/cm² at 210fs. These mirrors are typically used in ultra-short pulsed systems of Yb:YAG solid-state lasers.
Martin Ettenberg, with Princeton Infrared, gave us a breakdown on when and why you should use shortwave infrared imaging, and what this technology’s role can be as it relates to machine vision applications.
This year at Photonics West, Dan Ford with the Ophir Photonics Group talked to us about the importance of achieving laser consistency.
Jeff Briton and Dragan Grubsic spoke to us about some of the challenges involved in operating pulsed laser diodes and avalanche photodiodes in LIDAR for the automotive and sensor markets.
At Photonics West 2017, Gene Nepomuceno with Vision Research spent a few minutes with us discussing the three main factors one should take into account before selecting a high speed camera – resolution, frame rate, and sensitivity (with an honorable mention for transferring the data off of the camera).
At Photonics West 2017, Greg Staples focused on selecting different wavelengths for specific applications. Watch the video for wavelength selection guidance for precision agriculture, food sorting, mining, pharmaceutical quality control, and more.
FLIR, the industry leader in thermal technology, release the X8500sc and the X6800sc. Get hands on with the world’s fastest HD camera and the world’s lowest cost high speed camera at Photonics West. See us at booth #2516 or visit FLIR.com/science.