TECHNOLOGIES TO SEE AT SPIE PHOTONICS WEST 2018

• Color Filter Glass: UL365S UV Band-Pass Filter

  HOYA’s color filter glass products include sharp cut/long pass, light-balancing, color-compensating, neutral density, heat-absorbing, multi-band calibration, and UV Absorbing/VIS blocking filters for the UV through NIR regions. Featured is the new UL365S UV Band-Pass Filter that offers UV transmitting/VIS absorbing performance with high UV transmittance, while providing the highest resistance to any effects caused by UV solarization and/or exposure to high humidity conditions. 

• Digital Encoder Galvano Scanner: GM-1000 Series

  The GM-1000 series of digital encoder galvano scanners is comprised of four different models with variations in beam diameter, scan angles, small step response, and resolution.

• Laser Line Mirrors

  Optics Balzers has successfully developed and tested a special dielectric layer system with PARMS coating technology, making it possible to manufacture 45°-HR mirrors for 1030nm applications with an established destruction threshold of 0.44J/cm² at 210fs. These mirrors are typically used in ultra-short pulsed systems of Yb:YAG solid-state lasers.

• MHK C-Shape Stainless Steel Mirror Holders

  OptoSigma provides MHK C-shaped stainless steel mirror holders designed for 12.7 mm dichroic mirrors and beamsplitters. The holders feature high-resolution adjustment, and a knob-less design that is suitable for system integration.

• Nexview™ 3D Optical Surface Profiler

  The Nexview™ 3D optical profiler microscope stands out amongst competitive products by its ability to measure the topography of virtually any surface, irrespective of roughness, large steps and segments, thin films, steep slopes, with feature heights ranging from < 1 nm up to 20000 µm. It does all this in 3D, without contact, and provides the best qualities of other profiling technologies (stylus, confocal, focus scanning) without their limitations.

• Application Systems

  OptoSigma offers a wide range of application systems that includes microscope units, alignment systems, interferometers, bio-photonics, and laser processing systems. These application systems are designed for many specific applications including polarization measurements, vacuum and oven measurements, and glass and film inspections.