Newsletter | November 16, 2020

11.16.20 -- Littrow Prisms | Anti-Reflection Coatings | Machine Vision Lasers

 
Featured Solutions
Red To Near-IR Enhanced Surface-Mount Photodiode: NXIR-5C

Opto Diode’s new NXIR-5C is a red to near-infrared (NIR) enhanced photodiode ideally designed for laser monitoring, medical diagnostic equipment, industrial automation, scientific measurement, and military applications. The photodiode features a circular active area of 5 mm2 and delivers spectral response from 320 nm to 100 nm.

Request Information
Opto Diode, An ITW Company
High-Resolution, Low-Noise, Cooled, Digital VIS-SWIR InGaAs Camera: Ninox 1280

The Ninox 1280 offers visible extension from 0.4 µm to 1.7 µm to enable high-sensitivity scientific imaging using a 1280 x 1024 InGaAs sensor. With cooling to -15 °C, the camera achieves typical dark current readings of <2,000 e/p/s at this temperature, allowing for longer exposure times. The 10 µm x 10 µm pixel pitch enables the highest resolution imaging.

Request Information
Raptor Photonics Limited
X-Ray And Radiation Detectors

OSI Optoelectronics offers a family of X-ray and radiation silicon photodiode detectors for additional sensitivity in the X-ray region without the use of scintillator crystals or a screen. Their sensitivities range from 200 nm to 0.07 nm (6 eV to 17.6 keV) or 17.6 keV and above. Models are generally available with removable windows and can be vacuum compatible.

Request Information
OSI Optoelectronics
8-Channel Intensified sCMOS Camera: pco.dicam C8

The pco.dicam C8 camera system is the first multichannel intensified camera that exploits the full performance inherent to scientific CMOS sensor technology. With its high-end optical beam splitters, the input light can be equally distributed to the eight image intensifiers.

Request Information
PCO-TECH Inc.
Littrow Prisms

Littrow dispersion prisms are used to limit lasing to a specific wavelength in many optics applications. This is ideal for laser cavities, spectrographs, and other optical systems in which it is critical that a specified wavelength not be exceeded when a sample (tissue or otherwise) is subjected to a laser’s light.

Request Information
PG & O Precision Glass & Optics
0 To 60-Degree Polarization Optimized Anti-Reflection (AR) Coatings

Abrisa Technologies provides very wide-angle anti-reflection (AR) coatings for p-plane and s-plane polarization. These coatings support high throughput efficiency for broad angle polarization sensitive applications.

Request Information
Abrisa Technologies
ULTRA Series Bandpass Filters

Through a combination of precision wavelength control, ultra-steep edges, deep blocking, and the industry's highest transmission levels, Alluxa’s ULTRA Series of hard-coated, thin-film optical bandpass filters will optimize the performance of a variety of instruments.

Request Information
Alluxa, Inc.
2.8 MP HDR CMOS Sensor For Challenging Environments: 3U3MRXSAAC

Canon’s new 3U3MRXSAAC is a 2.8 MP CMOS sensor equipped with an HDR drive function that achieves a wide 120 dB range at low noise levels. The sensor’s wide range results in a greater ability to extract usable information, even in situations where there is a substantial difference between the lightest and darkest areas of an image.

Request Information
Canon USA Imaging Solutions Group
Silicon To Glass Bonding Wafer Substrate: SD-2

SD-2 is a type of substrate used to minimize the distortion and bowing effects caused by a thermal mismatch between two wafers. This mismatch is typically a result of the CTE curves of borosilicate glass and CTE curves of silicon single crystal waves crossing at 240oC.

Request Information
HOYA Corporation USA Optics Division
FLEXPOINT Machine Vision Lasers: MV Series
LASER COMPONENTS designs and manufactures laser modules to fulfill specific requirements in industrial image processing applications—a range of line lasers with a homogeneous power distribution generally used in metrology, as well as high-power lasers and special housing units.
Request Information
Laser Components USA, Inc.
10 pW To 300 mW Standard Photodiode Sensors

Ophir Photonics offers a series of wide spectral range photodiode laser measurement sensors for power ranges from 200 to 1800 nm within the UV and IR spectral ranges. Available models include the PD300-UV/IR without a filter for lowest powers from 200 to 1100 nm, the PD300-UV/IR with an installed filter for powers from 700 to 1800 nm, and the PD300-IRG for telecom wavelength fiber and free space measurements.

Request Information
Ophir Photonics
Extreme Precision Optics Group

Zygo’s Extreme Precision Optics group provides services involving aspheric surface fabrication, computer-controlled optical surfacing, ion beam figuring (IBF), precision glass machining, abrasive machining, and precision glass assembly.

Request Information
Zygo Corporation