03.01.23 -- Don't Miss Our Favorite Products For March

ITO and IMITO are transparent, high-transmittance conductive coatings that are extremely useful in EMI shielded windows for sensors and displays, heated outdoor camera windows, and more.

Alluxa’s ULTRA Series of hard-coated, thin-film optical bandpass filters will optimize the performance of a variety of instruments.

BaySpec’s SERS (Surface Enhanced Raman Scattering) readers are a mini wearable analyzer featuring proprietary miniaturized optics, a highly efficient detector, and maximum sensitivity with ultrafast acquisition.

Canon's new ultrasonic piezo motor is compact, quiet, and accurate for linear positioning applications.

The BEAMAGE-M2 is an automated M-squared measurement system. It is the only M2 system on the market equipped with a complete set of 50 mm optics and a sensor aperture of 11.3 x 11.3 mm.

The Fiber-Q series fiber-coupled acousto-optic modulators offer a high extinction ratio, low insertion loss, and excellent stability in both polarization-maintaining (PM) and non-PM formats.

Iridian Spectral designs and manufactures optical filter solutions for long haul and metro access fiber-optic telecom customers. Iridian also applies the same proven thin film filter technology to address the growing needs for datacom optical filtering providing wavelength selectivity to DCI devices such as transceivers and tunable laser assemblies (TLA).

Mad City Labs' QS-PLL is an atomic force microscope (AFM) controller designed for use with resonant probes, such as tuning forks, and Mad City Labs nanopositioners and micropositioners. The controller integrates motion control and phase lock loop (PLL) control thus streamlining the hardware interface.

The AXUV63HS1 high-speed photodetector is designed with a circular active area of 9-mm diameter and is ideally suited for electron detection.

The H-840 hexapod series is universally applicable for tasks in precision positioning. Some variants are optimized for high dynamics and can, for example, be used for simulating motion, whereas models with gearhead support are suitable for heavier loads.

PG&O’s new sapphire optics operate from the visible out to the infrared spectral wavelengths. The thermal- and scratch-resistant substrate is exceptionally durable and able to withstand extremely harsh environmental conditions and temperature variations.

The Ninox 1280 offers visible extension from 0.4 µm to 1.7 µm to enable high-sensitivity scientific imaging using a 1,280 x 1,024 InGaAs sensor. With cooling to minus 15 °C, the camera achieves typical dark current readings of <2,000 e/p/s at this temperature, allowing for longer exposure times.

This high-resolution C-mount SWIR lens with 25.4-mm image circle is designed for the 800 – 1,800 nm spectral range. With its robust mechanical design and locking screws for focus and iris, it maintains its high optical imaging performance even in harsh environments.

Sensors Unlimited’s 1024-LDH2 is a high-speed 1,024-pixel, line scan, InGaAs camera that increases the A-line rate to 91,911 lines per second to enable spectral domain OCT to capture detailed 3D volumes of the retina, nerve head, and choroid layer in the blink of an eye.

Zygo's Verifire MST is the only commercial interferometer system that can measure multiple surfaces simultaneously, maintaining relative surface information and providing quick and simple results from multiple surfaces.