Newsletter | January 18, 2021

01.18.21 -- Digital Scientific Frame Transfer EMCCD | Photodetectors w/ Integrated Thin-Film Filters

 
Sponsor
Featured Solutions
Digital Scientific Frame Transfer EMCCD: Kestrel
Raptor Photonics’ Kestrel is a digital monochrome scientific frame transfer EMCCD camera based on e2v’s CCD-60 back-thinned 1/3″ sensor with high sensitivity, speed, and resolution and QE up to 95 percent. With the EM gain on, it offers less than 0.01 electrons read noise.
Request Information
Raptor Photonics Limited
Precision Optics

PG&O’s Precision Optical Fabrication facility specializes in Plano optical components. Our many years of industry experience enable us to interact with your engineers in order to produce needed components rapidly — without sacrificing quality or cost-effectiveness.

Request Information
PG & O Precision Glass & Optics
Photodetectors With Integrated, Directly Deposited Thin-Film Filters

Opto Diode introduces two new 13.5 nm, directly deposited thin-film filter photodetectors ideal for electrical performance in many applications, including laser power monitoring, semiconductor photolithography, and metrology systems that utilize extreme ultraviolet light. The SXUV100TF135 and SXUV100TF135B feature a 100 mm2 active area, detection capabilities between 12 nm and 18 nm, and a responsivity of 0.09 A/W at 13.5 nm.

Request Information
Opto Diode, An ITW Company
Ophir Wide Beam Imager (WB-I)

The Ophir Wide Beam Imager (WB-I) accessory offers a solution for measuring both size and power distribution of a divergence and large diameter source, such as an LED, VCSEL, or fiber laser.

Request Information
Ophir Photonics
Flash LIDAR Sensor: SPAD2L192

Laser Components offers the 192 x 2-pixel, solid state CMOS sensor designed with single-photon avalanche diodes (SPADs) to reach amplification of 108 for a time with high count rates and low noise. This highly sensitive, advanced sensor is used in Flash LIDAR systems, industrial robots, and surveillance technology.

Request Information
Laser Components USA, Inc.
Optical Filters For LIDAR Laser Sensors

Iridian Spectral Technologies offers LIDAR laser sensor systems with common laser wavelengths including 532 nm, 905 nm, 1064 nm, and 1550 nm. These filters provide more signal with less background and are ideal for laser sensor applications, including airborne laser scanning and other methods of capturing 3-D data of large areas.

Request Information
Iridian Spectral Technologies
Color Filter Glass

HOYA’s color filter glass products are ideal for applications involving medical devices, CCDs, imaging, telecommunications, calibration, electronic instrumentation, night vision, CRT/LCD/FED displays, and machine vision.

Request Information
HOYA Corporation USA Optics Division
ULTRA Series Bandpass Filters

Through a combination of precision wavelength control, ultra-steep edges, deep blocking, and the industry's highest transmission levels, Alluxa’s ULTRA Series of hard-coated, thin-film optical bandpass filters will optimize the performance of a variety of instruments.

Request Information
Alluxa, Inc.
Glass Strengthening Capabilities

Abrisa's chemical strengthening process toughens soda lime through a sodium and potassium ion exchange in a salt bath. Glass can be strengthened from 8 to 16 hours and is often requested for toughened thin display applications.

Request Information
Abrisa Technologies
OCI-M Multispectral Camera

BaySpec’s OCI-M is a multispectral imager designed for aerial imaging in precision agriculture, remote sensing, security, material detection, and geological survey. The aerial imager has eight selective bands covering the range from 400 to 1000 nm.

Request Information
BaySpec Inc.