Products and Services
RSS
Non-Polarizing Laser Cube Beamsplitters
OptoSigma Corporation
•Datasheet: OptoSigma Optical Components
- All-dielectric coatings optimized to be insensitive to polarization at design wavelengths
- BK7 cube material - polished to λ/4
- Available in a range of laser wavelengths
- Highest performance - negligible absorption
- 5mm beamsplitter cubes available for fiber optic applications
- Standard cubes from 5 to 20mm
The all-dielectric coatings for these cube beamsplitters are largely insensitive to the polarization state of the incoming beam. The coatings have been designed to hold both the s- and p-polarization components to the same ratio of reflection-to-transmission over a specific laser wavelength region. The graph shows a typical reflectivity curve for the 633nm wavelength. At all the design wavelengths the s- reflectance equals the p- reflectance within ±3%, while both the reflectance and the transmittance equal 50% within ±5%.
Non-polarizing beamsplitters are available for other wavelength regions. Please call.
These beamsplitters are made from optical grade BK7. The faces are all polished flat to λ/4 and two like prisms are cemented to form a cube. Both pairs of sides are parallel to within 5arcmin. The four outer faces are all Anti-Reflection coated. Four standard sizes are offered: 5,10,15 and 20mm. Larger sizes are available on request.
Click Here To Download:•Datasheet: OptoSigma Optical Components
